Pinterest Hidden Image

This easy DIY Milk and Honey soap can be made in just 10 minutes, and it boasts lots of great skin benefits from the goats milk and honey! A wonderful quick and easy homemade gift idea!

10 minute diy milk and honey soap

This post may contain affiliate links. I will receive a small commission from these sales at no additional cost to you!

HOMEMADE MILK & HONEY SOAP

Homemade milk and honey soap have always been one of my favorites. It smells divine, and there are loads of skin benefits from the honey – it’s moisturizing, clarifying, soothing, and also naturally antibacterial. Because of these properties, honey is fantastic for the treatment of acne and aging and for general complexion brightening. C’mon now, we all could use a little bit of anti-aging and complexion brightening, right?

easy 10 minute diy soap made with honey and milk

HOW TO MAKE MILK AND HONEY SOAP: 

I love these natural soaps for their sweet delicate aroma and for the incredible skin benefits, but what I love even more is the fact that I can whip up an entire batch of these beauties in under 10 minutes! They’ll take a little longer to firm up, but the actual “work” part is done in less than 10 minutes.

easy diy honey milk soap

SUPPLIES TO MAKE DIY MILK & HONEY SOAP:

diy milk honey soap in 10 minutes

I didn’t take any step-by-step photos of the process this time, but I did create a quick video that will show you just how easy it is to make these soaps!

 

easy milk and honey soap made from tutorial

I generally use about 1 lb (or half of the block) of soap base at a time to make ten honeycomb soaps – if you want to fill the entire mold (19 soaps), use the full 2 lbs of soap base. Slice the block of goat’s milk soap base into cubes that are approximately ½” in size. The soap base is soft, and it cuts easily with a kitchen knife. 

quick and easy honey milk soap

Place the cubes inside of a 4-cup Pyrex measuring cup, and melt in the microwave. Melt in 20-30 second increments, stirring well after each microwave session, to ensure that the soap is completely melted.

When the soap is completely melted, stir in 3 tablespoons of honey and a few drops of yellow soap colorant. I also added one drop of red colorant to give my soap more of a golden hue. 

easy diy milk honey soap

Pour the melted soap into the honeycomb mold, and allow to sit undisturbed until cool. The cooling process can take anywhere from 30 minutes to 2 hours depending on temperature and humidity levels.

When the soap is cool and firm, carefully remove them from the silicone mold.

easy gift idea homemade soap

These DIY milk & honey soaps make a fantastic homemade gift – perfect for friends, family, teachers, coaches, and neighbors! They’re great for fundraisers and craft fairs, too!

—————————————————————————————

Frequently Asked Questions: 

We get asked a LOT of questions about our melt and pour homemade soaps, so here are a few FAQs that you might find useful!

Do melt and pour soaps need to cure?

No! Unlike cold process soaps, your new melt and pour soaps will be ready to use just as soon as they have completely cooled and hardened.  

How long does homemade soap last? 

The shelf life for melt and pour soap base is around two years, but the shelf life of your finished soaps will depend upon what you have added to them. Soaps with simple color and fragrance additives should last at least the full two years. Soaps with added botanicals or fresh ingredients will have a shorter shelf life. 

Many soaps will last well beyond the two year shelf life, however, you may find that the color or fragrance fades over time, and the soaps may begin to lose moisture and become dry. 

For these milk and honey soaps, honey has an extremely long shelf life, so they will be good for at least two years if properly wrapped and stored! 

How do you wrap/package/store homemade soap?

Melt and pour soaps should be wrapped and packaged soon after making. We recommend wrapping the soaps with plastic wrap or placing them in a plastic zipper bag and storing them in a cool and dry location. Soaps may also be shrink wrapped using shrink plastic and a heat gun, but be careful and work quickly so that you don’t accidentally melt the soap in the process! 

Why does melt and pour soap sweat? And how can I prevent it? 

Glycerin can be found in many different types of soap bases, and glycerin is known for its ability to attract moisture (which makes it great for hydrating skin!). Glycerin attracts moisture from the air which often will appear as small beads of “dew” or “sweat” on the surface of the soap. This is NOT moisture being released from the soap itself! 

To prevent your melt and pour soaps from sweating, be sure to wrap them promptly and store them properly. 

How do I get rid of bubbles in my soap?

Spritzing the surface of your freshly-poured soap with 91% Isopropyl Alcohol (or higher) will break the surface tension and help release trapped air bubbles. 

Can I use a different type of soap base?

You bet! Well, most likely anyway. While changing the soap base may alter the benefits that are listed in our soap recipes, we have found that 98% of our recipes can be made with alternative melt and pour soap bases. Goat’s milk soap base, shea butter soap base, coconut milk soap base, glycerin soap base, and others are fairly interchangeable and will not likely alter the successful outcome of your finished soap. 

What else can I add into my soap?

There are SO many different ways that you can customize your homemade soaps! Experiment with adding different essential oils, butters (shea butter and cocoa butter are fantastic options!), natural colors, botanicals, and more! You can add extra skin-nourishing benefits by including liquid oils such as coconut oil, sweet almond oil, or olive oil – use just a small amount to avoid making your bars of soap too soft! 

For some ideas and inspiration, be sure to check out our entire collection of DIY bath and body products!

quick and easy honey milk soap

10-Minute DIY Milk and Honey Soap

5 from 9 votes
Print Pin Save Rate
Prep Time: 5 minutes
Active Time: 5 minutes

What You’ll Need:

  • 2 lb Goat Milk Soap Base
  • 5 tbsp Raw Honey
  • Gold Soap Colorant
  • 91% Isopropyl Alcohol, in a spray bottle
  • Microwave-safe Measuring Cup
  • 12” Silicone Honeycomb Mold

Instructions:

  • Slice the goat’s milk soap base into small cubes and place into a microwave-safe measuring cup. Melt in the microwave in 30-second increments, stirring well after each session, to ensure that the soap is completely melted.
  • Carefully stir in gold soap colorant and honey. Pour the melted soap into the mold and spritz with isopropyl alcohol to remove any air bubbles.
  • Allow the soaps to sit undisturbed until completely firm (approximately 60-90 minutes depending on temperature and humidity) before unmolding.
Did You Make This?Mention @HeidiKundin or tag #hihmakersclub on Instagram to show off your awesome work! ♥

Pin This Homemade Soap for Later!

10 minute milk and honey all natural soap recipe

Leave a Reply

Your email address will not be published. Required fields are marked *

Rating




163 Comments

  1. So glad I came across your post! I’m very excited to try this out. My daughter in laws and I will be making these for Teacher Appreciation gifts. Can you tell me what honey you used? When I clicked the Organic Raw Honey link it didn’t work.

  2. I made a rookie mistake. This was my first time making soap and I didn’t realize. After melting the soap base it still had a few chunks so silly me grabbed a whisk and tried to get out the lumps. It worked but left little frothy bubbles on the backside of my soaps. :/
    Can I re- melt them and pour them back into the mold?
    Thanks, Monica

  3. These are extremely cute and I love honey soaps. I want to make them as soon as possible! Thank you for this recipe!

  4. Thanks for the instructions! I made these as gifts for coworkers and extended family – I’m excited to give them for the holidays! I used the whole block of soap base (ordered the same one that you’ve listed here) and that made ~25 of the honeycombs (not all were completely full – I was trying to maximize my gift recipients)! The silicone mold (I also used the one you recommended) holds 19 honeycombs (I wonder if the above commenter used a different mold or if the mold has changed), so I did this in a two batches. It was as easy as you described and they are adorable! For added scent, I also used some honeysuckle fragrance oil (http://www.amazon.com/Honeysuckle-Fragrance-Oil-Premium-Scented/dp/B00KGOL1GM). Overall, I spent $44 on this project, including the mold, soap base, fragrance oil, soap dyes, and gift wrapping costs. It was $37 excluding the gift wrapping costs. I’m giving out 12 gifts, so at a cost of a bit over $3.50 per gift, this is a great bulk gift (I gave 2 honeycomb soaps to each person + an extra in one).

    1. Hi, How many drops of the Honeysuckle Oil did you add? Mine didn’t really have a scent so I’d like to try this too!

  5. Love these! Thank you for sharing the recipe. I made 2 batches – one last night and just finished the second. I must be slow – took me about 45 minutes, but then again, that included the clean up. LOL! Using these for Christmas gifts – they’re going to love them! May have to whittle my list down by one so I can have one for myself.

    I’ll definitely be doing this again!

  6. Oh my gosh! I was looking for a cute, budget-friendly DIY for christmas gifts this year and thanks to you I just ordered all of the components off of Amazon! The milk and honey soap for the girls on my list, and the coffee exfoliating soap for the guys! I can’t wait to make it all, THANK YOU!

  7. These are just adorable! I’m going shopping right now & make some gifts. I love receiving homemade gifts as well as making them. You smart girl! I’m so proud of you & your accomplishments, especially homeschooling 3 handsome boys.

  8. These soaps are so cute! They’re cooling right now! I plan to use them as Christmas gifts! How do you recommend storing them? I want them to keep freshness and their shape!

  9. Heidi, these are adorable! I’m definitely going to make these for Christmas gifts. Does your recipe make enough to fill every one of the cute hexagon molds?

    1. Thanks so much, Bettsi! The recipe as written uses half of a block of soap base to make nine soaps. If you double the recipe and use the full 2 lb. block of soap base, it will fill the entire mold nicely (there are 17 hexagons in the mold). 🙂

    1. No, I didn’t. The silicone makes it very easy for the finished soap to slide right out of the flexible mold. 🙂

  10. Can these be made with coconut milk? Thanks in advance for any advice. I’m going to try this recipe- looks great!

  11. Hi, I know this sort of defeats the purpose of the “milk and honey” aspect, but would it still work with the shea butter soap base? Is there a pro or con for either soap base? Ie, does the goat’s milk soap base have a distinct smell? Any advice would be helpful! Thank you so much for posting!

    1. You can definitely use the shea butter soap base as an alternative if you prefer. The goat’s milk soap does not have a distinct fragrance that I can discern, so I’m sure that either one of the soap bases will produce similar results in terms of the finished aroma. Good luck! 🙂

  12. I made this tonight and they came out so cute! Thank you so much for posting! The only difference that I noticed is that there was no scent to them. I followed the recipe exactly. They are definitely scentless.

    1. Hmmm, that’s strange, Amanda! Mine were definitely honey scented. Perhaps it has to do with the different varieties of honey used? I’m glad they were still cute though! 🙂

  13. This is just so cute! If I will not know that those are soaps I will probably eat it. It looks like a white chocolate in my eyes. Anyways, I know milk is a good source of nutrients for our skin. In my own ways, I mix milk and lemon juice and apply it every night.

  14. Hi, do you have a video on how to make the milk and honey soap? I love the simplicity of this recipe. Can’t wait to try it! Thanks!

  15. I love the mold! Only a question.. have you cut the hexagons or the mold creates them already divided? thanks 🙂

    1. Hi Arianna! The mold creates them already divided (as long as you don’t overfill the hexagon shaped cups!). 🙂